No-Acid Ultra is a powerful acid neutraliser and moisture removal product for AC/R systems. Acid Test allows you to see how acidic your system is to determine how much No-Acid Ultra you need to put into the system
Low (PH >6.8): 6ml of No-Acid Ultra/ 2 Litres lubricant
Medium (PH <6.8 >5.8): 6ml of No-Acid Ultra/ 1.5 Litres lubricant
High (PH <5.2) 6ml of No-Acid Ultra/ 0.7 Litres lubricant
Extreme White Ultra
Extreme White Ultra is a leak stop solution for use on systems that run R600 and R290.
Extreme White Ultra will seal leaks up to 0.3mm.
Extreme White Ultra is an ideal product for preventative maintenance as it can be injected into the system and move through it without affecting performance or internal components. Whenever a leak appears Extreme White Ultra will fill it.
Make sure system is running while injecting Extreme White Ultra. Connect Extreme White Ultra using 1/4″ SAE to the low side. Run system normally for an hour and then check refrigerant levels again.
FlexTie supports duct without compressing the inner core or jacket and prevents kinks or sags which drastically improves air flow.
adjustable from 100mm – 400mm diameters
UL approved for use in return air plenum spaces
width exceeds SMACNA standards
HVAC Accessories Isolator Switches$19.99
Extreme Ultra is a leak stop solution for copper pipes and rubber components. Extreme Ultra will seal leaks up to 0.3mm.
Extreme Ultra is an ideal product for preventative maintenance as it can be injected into the system and move through it without affecting performance or internal components. Whenever a leak appears Extreme Ultra will fill it.
1. Turn on A/C and run at lowest temp
2. Connect Extreme Ultra to charging port
3. Pump down refrigerant of external unit
4. Inject Extreme Ultra into system
5. Re-open valve
6. Disconnect Extreme Ultra
7. Run A/C system in this condition for 30 minutes to ensure circulation of Extreme Ultra
Extreme Ultra will work with all common refrigerants and is suitable for automotive A/C units as well.